Lviv Locomotive Repairing Plant – perspective is in technologies!

Lviv Locomotive Repairing Plant – perspective is in technologies!

Our plant was founded in 1861. Over the years, we have become one of the largest companies in Ukraine with capital-restoration reforms and modernization of electric vehicles, performing linear products of electric machines, wheelsets and
manufacturing of spare parts.

A large number of technologies developed in the technological direction, the use of modern electronic systems for the repair of electrics, the manufacture of spare parts from high-quality materials that produce the products of our enterprise, allows you to save on electricity and technical service of the motor unit.

In agreement with the Customer, other works can be carried out, including the installation of radio stations, air conditioners, control systems, etc., including a full range of modernization of telecommunications with extended service.

During the modernization of electronics, it is possible to continue to operate for a considerable period of time. This allows you to significantly save Customer’s money, as it allows you to refuse purchase of new electric locomotives.

For the operational characteristics of a repaired electric locomotive, existing standard types can be used and can be operated on any railroad tracks of 1520 mm circle, electrified direct and alternating currents.

If necessary, to operate the repaired electrical equipment on the general use roads PJSC “Lviv Locomotive Repair Plant” can provide the entire package of required permits. Even after the end of warranty period our company has a number of maintenance services of various types of equipment.

PJSC “Lviv Locomotive Repair Plant” offers modernization programs for different types of vehicles. The main criterion for approaches for each particular Customer is economic efficiency and the optimal cost of work. It depends on the technical condition of the machines and the each Customer’s purposes.

The modernization program solves its complex problem, so we also take into account modern sanitary norms. The workplace of the project engineer is in parallel with the technical equipment of the locomotive.

Our programs of modernization comply with the requirements of Customer and are quite competitive. Modernized electric locomotives are highly reliable. In addition, maintenance facilities are significantly reduced.

REPAIR PRODUCTS

DC power locomotive series

Overhaul and modernization of DC electric locomotives

• VL8, VL10, VL11, VL11m/5, VL11m/6, DE1

AC power locomotive series

Overhaul and modernization of AC electric locomotives

• VL80, VL60, VL40

If it is necessary to operate a refurbished electric locomotive on the main line we can provide the entire package of necessary permits. Even after a warranty life, our company provides a number of maintenance services for equipment of different types.

Lviv locomotive repair plant offers appropriate modernization programs for different types of rolling stock. The main criterion when selecting a program for each specific Customer is economic efficiency and optimal cost of work. It all depends on the technical condition of the machine and the customer’s goals.

Mine electric locomotives

Overhaul with the modernization of traction units

• PE2U, PE2M, OPE1AM, OPE1BM

Modernization of traction units is carried out not only in the volume of restoration of the electric locomotive, control and traction unit, while maintaining the principles of power equipment electric locomotive and the use of existing traction equipment in all modes of its operation, but also solving new problems through the use of modern software and technical solutions in the management and diagnostic system.

Upgrading mine electric locomotives involves improving their traction characteristics, reducing operating costs, maintaining their reliability and lifespan. Modernized electric locomotives meet state standards, instructions and regulations, as well as sanitary regulations and ergonomic requirements.

DC traction electric motors

Overhaul of DC traction electric motors

• NB-406B, ED-118A(B), TL-2K1, NB-511, ED-141U, DT-9N, TE-006

AC traction electric motors

Overhaul of AC traction electric motors

• NB-412K, • NB-418K6, NB-418KR1

Auxiliary electric machines

Overhaul of auxiliary electric machines

• NB-110, NB-429A, NB-430A, NB-431A, NB-436A, NB-436V, NB-453, NB-455, NB-455A,
• AE-92-4, AP-81-4, AP-82-4, AS-81-6, AS-82-4
• TL-110M, TL-122
• P-11M
• DMK-1/50-U2, DK-405K
• DT-51 DT-53, DT-61A, DT-63
• ETV-20, ETV-21

Wheelsets

Wheelsets repair

• VL60 wheelsets
• DE1 wheelsets
• VL40 wheelsets with bearings
• Modernized VL40 wheelsets with bearings
• VL80T wheelsets with bearings
• VL10, VL11 wheelsets with bearings
• VL8 wheelsets with bearings
• VL8M wheelsets with bearings
• Traction machines wheelsets with bearings
• CME3 locomotive wheelsets
• M62/2M62 locomotive wheelsets
• ER2, EPL2T wheelsets

Products of own manufacture

• Spare parts for repair of electric machines
• Spare parts for electric locomotives repair

OVERHAUL AND RESTORING REPAIR WITH MODERNIZATION OF
TRACTION UNITS SERIES PE2U, PE2M, OPE1AM, OPE1BM

Modernization of important shareholders is carried out not only in the reconstruction but also in the management of energy equipment, as well as in the use of existing equipment and equipment, as well as the development of new tasks for the use of upto-date technical solutions in terms of management and diagnostics systems.

In the scope of modernization, of traction units series PE2U, PE2M, OPE1AM, OPE1BM also is taken into account existing combined rotary-plate or screw type compressors, as well as DC motors on asynchronous ones.

Modernization of units involves improvement of their main characteristics, reduction of operating costs, maintenance of their reliability and service. Modernized, electric locomotives meet the instructions and standards, as well as sanitary rules and ergonomic requirements.

PJSC «Lviv Locomotive Repair Plant» offers the following services:

Blacksmithing

• colored and brass casting in a kokel under pressure;
• casting on the models of replacement, cutting and bending of the metal;
• casting of bronze, brass, aluminum billets;
• hot volumetric state
• semi-squeezing of details on presses

Tool making

• designing and manufacturing of stamps and foundry molds;
• mechanical treatment, toothpick;
• zinc plating;
• manufacture of springs;
• manufacture of metalwork tools;
• heat treatment of shafts.

Lviv Locomotive Repairing Plant – perspective is in technologies!

PJSC ” Lviv Locomotive Repairing Plant “